BHXXX - STAY CLEAN SOLDERING FLUXES
- MSDS: BHXXX
- Manufacturer: HARRIS J W CO INC
- Product Name: STAY CLEAN SOLDERING FLUXES
- National Stock Number: 3439-00-255-9935
Product Identification
Product ID:STAY CLEAN SOLDERING FLUXES
MSDS Date:04/01/1990
FSC:3439
NIIN:00-255-9935
MSDS Number: BHXXX
Responsible Party
CINCINNATI, OH 45242-4110
US
Emergency Phone: 800-543-4536
Info Phone: 513-891-2000
Cage: JO820
Contractor
Telephone: 513-891-2000
Cage: 27911
Ingredients
ZINC CHLORIDE (SARA III)
CAS: 7646-85-7
RTECS: ZH1400000
Fraction By Weight: <40%
OSHA PEL 1 MG/M3/2 STEL
ACGIH TLV: 1 MG/M3/2STEL FUME93
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
MINERAL OIL, PETROLEUM DISTILLATES, HYDROTREATED LIGHT
CAS: 64742-53-6
RTECS: PY8036000
OSHA PEL 5 MG/M3 (OIL MIST)
ACGIH TLV: 5 MG/M3 (OIL MIST)
Hazards
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and
Chronic:ACUTE-EYES/SKIN:IRRITATION.INHALATION:IRRITATES RESPIRATORY
SYSTEM.CHRONIC-NONE SPECIFIED BY MANUFACTURER.
Explanation of Carcinogenicity:THE PRODUCT CONTAINS NO INGREDIENT THAT
IS LISTED BY IARC, NTP OR OSHA AS A CARCINOGEN.
Effects of Overexposure:EYES/SKIN/INHALATION:IRRITATION
Medical Cond Aggravated by Exposure:NONE GIVEN BY MANUMACTURER.
First Aid
First Aid:EYE:FLUSH W/WATER 15 MIN, HOLD LIDS OPEN. SKIN:WASH WITH
SOAP & WATER. REMOVE CONTAMINATED CLOTHING AND LAUNDER BEFORE
REUSE. INHALED:REMOVE TO FRESH AIR. RESTORE BREATHING IF
NECESSARY. INGESTED:D O NOT INDUCE VOMITING. GIVE 2 LARGE GLASSES
OF MILK OR WATER AND GET IMMEDIATE MEDICAL CARE. GIVE NOTHING BY
MOUTH IF UNCONSCIOUS. IF IRRITATION PERSISTS OR IS SEVERE,SEE A
DOCTOR.
Fire Fighting
Flash Point:FLAMMABLE
Extinguishing Media:USE WATER FOG, CARBON DIOXIDE, FOAM, OR DRY
CHEMICAL.
Fire Fighting Procedures:FIRE FIGHTERS SHOULD USE NIOSH APPROVED SCBA &
FULL PROTECTIVE EQUIPMENT WHEN FIGHTING CHEMICAL FIRE. USE WATER
SPRAY TO COOL NEARBY CONTAINERS EXPOSED TO FIRE.
Unusual Fire/Explosion Hazard:FIRE OR EXCESSIVE HEAT MAY CAUSE
PRODUCTION OF HAZARDOUS DECOMPOSITION PRODUCTS.
Accidental Release
Spill Release Procedures:CONTAIN SPILL, ABSORB, SWEEP-UP, DISPOSE,
FLUSH AREA WITH WATER TO CHEMICAL SEWER.
Handling
Handling and Storage Precautions:STORE IN A COOL, DRY AREA.
Other Precautions:READ AND FOLLOW MANUFACTURERS INSTRUCTIONS. SEE ANSI
STANDARD Z49-1. ALSO OSHA PUBLICATION 29CFR1910.
Exposure Controls
Respiratory Protection:RESPIRATOR WILL NOT NORMALLY BE NECESSARY. USE
NIOSH/MSHA APPROVED AIR SUPPLIED RESPIRATOR OR RESPIRATOR FOR METAL
DUST/FUME IF EXPOSURE IS ABOVE THE TLV/PEL. SEE 29 CFR 1910.134 FOR
REGULATIONS PERT AINING TO RESPIRATOR USE.
Ventilation:NORMAL ROOM VENTILATION IS USUALLY SUFFICIENT. SUPPLEMENT
WITH LOCAL EXHAUST IF PEL/TLV IS EXCEEDED.
Protective Gloves:HEAT PROTECTIVE
Eye Protection:GLASSES OR GOGGLES WITH ANSI LENSES
Other Protective Equipment:CLOTHING AS NECESSARY TO PROTECT AGAINST
THERMAL BURNS.
Work Hygienic Practices:USE GOOD INDUSTRIAL HYGIENE PRACTICE. WASH
THOROUGHLY BEFORE EATING OR DRINKING.
Supplemental Safety and Health
Chemical Properties
HCC:N1
Appearance and Odor:TAN/GOLD COLOR PASTE, NO APPRECIABLE ODOR
Stability
Stability Indicator/Materials to Avoid:YES
NONE GIVEN BY MANUMACTURER.
Stability Condition to Avoid:HIGH TEMPERATURES, SPARKS, AND OPEN FLAMES
Hazardous Decomposition Products:ZINC OXIDE AND ZINC CHLORIDE FUMES
Disposal
Waste Disposal Methods:DISPOSE I/A/W FEDERAL, STATE & LOCAL REGULATIONS
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.